Marietta residential refinishing
Bathtub Refinishing in Marietta, GA
Many Marietta bathrooms still have the tub that came with the house: a heavy cast iron or porcelain fixture that is solid underneath a tired finish, or a fiberglass tub with cracks or scratches. Refinishing and qualifying repairs can restore it without tearing out walls, tile or flooring.
Older fixtures
Restoring the original tub in an older Marietta home
Older homes around the Marietta Square and the mid-century neighborhoods across Cobb County often have cast iron or porcelain-enamel tubs. These fixtures were built to last, but decades of cleaning wear the glaze down until it feels rough, stains easily or shows chips to the metal.
Refinishing replaces the worn surface with a new bonded coating while the tub stays where it is. For a fixture that weighs several hundred pounds and is set into tile, that can avoid demolition, disposal and the wall and floor repairs that come with replacement.
Older enamel can need more preparation than a newer tub, and earlier coatings have to be assessed before anything new goes on. We look at that during the estimate rather than quoting from a photo alone when the history is unclear.
Common in older bathrooms:
- Original cast iron or porcelain tubs with dull, rough or stained enamel
- Pastel or two-tone colors from earlier remodels
- A previous refinish that is peeling or bubbling
- Tile that is still sound but no longer matches a new tub color
- Tubs set into walls or tile where removal would mean demolition
Marietta project
Bathtub Reglazing After an Unsatisfactory Earlier Refinish in Marietta, GA
A Marietta homeowner was not satisfied with a bathtub refinish completed earlier by another company. Unique Refinishers removed the previous coating and reglazed the tub, leaving it with a new glossy white finish.
When a tub has already been refinished, the earlier coating is assessed and removed before a new finish goes on, so a second refinish starts with taking off the previous work.
This Marietta tub is one of the projects featured on our customer reviews and project results page.
Before — Earlier refinish
After — Reglazed
Before and after reglazing at a home in Marietta, Georgia, photographed from the same angle.
Materials
Porcelain, cast iron, steel and fiberglass
Preparation and repairs depend on what the tub is made of, so the first step is identifying the material and any coating already on it.
| Material | Typical problems | Refinishing outlook |
|---|---|---|
| Cast iron with porcelain enamel | Worn or etched enamel, chips to the iron, rust spots and staining | Often a strong refinishing candidate when the body is sound; older enamel may need extra preparation |
| Pressed steel | Chipped enamel, rust around the drain and overflow | Suitable when corrosion is localized and the tub is stable |
| Fiberglass | Scratches, fading, chalky surface, cracks or soft spots | Small cracks and holes can be repaired; flexing shells need support assessed first |
| Acrylic | Dull finish, scratches, previous coatings | Assessed for movement and coating compatibility |
Fiberglass repairs
Repairing a cracked or worn fiberglass tub
Fiberglass tubs are common in newer additions and remodels. They are lighter than cast iron and can crack, chip or develop soft spots, especially if the base was not fully supported when installed.
Not every crack can be repaired. A tub that flexes noticeably, leaks through the shell or sits on a damaged subfloor needs that problem fixed first.
Before
AfterStep 1: Inspect the shell
We check for cracks, holes, soft spots and movement under the floor of the tub, and ask about any leaks.
Step 2: Repair qualifying damage
Eligible cracks, chips and holes are filled and smoothed so the repaired area sits level with the surface.
Step 3: Refinish if needed
When the whole surface is faded or the repair would show, the tub can be refinished for one uniform color.
Refinish or replace
Refinish or replace your Marietta bathtub?
Refinishing usually fits when
- The tub is stable and does not leak through the body
- Damage is on the surface: wear, stains, chips, small cracks
- You like the layout and want to keep sound tile
- Removing the tub would disturb walls or flooring
Replacement may be better when
- The tub is corroded through or structurally failing
- There is an active leak, rot or failed waterproofing
- You are changing the size, shape or layout of the bathroom
- A fiberglass shell flexes and cannot be supported
How long a refinished tub can last
Unique Refinishers has refinished bathtubs for more than 55 years. Care matters: clean with non-abrasive products, avoid suction-cup mats and repair dripping faucets promptly.
In our experience it is not uncommon to see tubs we refinished 10–15 years earlier still in excellent condition. That is an observation from our own work, not a guarantee: results depend on the condition of the tub, surface preparation, use and cleaning. Ask about written terms for your project before work begins.
Not sure what your tub is made of?
Send a few photos and tell us roughly how old the bathroom is. We will help identify the material and talk through whether refinishing makes sense.
Marietta homeowner questions
Frequently asked questions
Is my older Marietta cast iron tub worth refinishing?
Often, yes. Cast iron is heavy and durable, and removing one usually means disturbing walls, tile and flooring. If the body is sound and corrosion is limited, refinishing renews the bathing surface while the tub stays in place. Older enamel can need extra preparation, which we discuss during the estimate.
Do you offer bathtub reglazing in Marietta?
Yes. Bathtub reglazing is another name for the refinishing described on this page: the tub stays in place, qualifying damage is repaired and a new bonded finish is applied. See bathtub reglazing in Marietta, or read refinishing vs. reglazing for how the terms compare.
Can you fix a crack in a fiberglass tub?
Many small cracks, chips and holes can be repaired. If the floor of the tub flexes, the support underneath must be addressed first or the repair may not hold. Read more on our fiberglass tub repair page.
Do I need to replace the tile if I refinish the tub?
No. Sound tile can stay as it is. If a new tub color would clash with dated tile, the tile can be refinished at the same time for a coordinated look.
What affects the price of refinishing in Marietta?
The tub material and size, the amount of repair, any previous coating, the color you choose and whether tile or other surfaces are included. Estimates are free; our cost guide explains the main factors.
When should I replace the tub instead?
Replacement makes more sense when the tub is structurally failing, badly corroded through, leaking from the body, or when you are changing the bathroom layout anyway. We will tell you if refinishing is not a good fit.
Marietta service area
Marietta areas we serve
We work with homeowners, landlords and condominium owners across Marietta, from historic homes near the Square to East Cobb subdivisions. Share your address to confirm availability.
- Marietta Square
- Whitlock Avenue
- East Cobb
- Powers Ferry Road
- Johnson Ferry Road
- Barrett Parkway
- Burnt Hickory Road
- Near Kennesaw Mountain
Unique Refinishers works from its headquarters in Sugar Hill, Georgia, and does not have a separate office in Marietta. Availability varies by address, so call or request an estimate and we will confirm service for your home.
Nearby service pages
Pages for neighboring Cobb, Cherokee and North Fulton communities, including Kennesaw just up I-75.
- Bathtub refinishing in Kennesaw
- Bathtub refinishing in Smyrna
- Bathtub refinishing in Woodstock
- Bathtub refinishing in Roswell
See all residential services on our residential bathtub services page, check the Greater Atlanta service area overview, or browse real before-and-after work in the portfolio.
Prefer email or want our hours and address? Visit the contact page.
Request Your Free Marietta Bathtub Refinishing Estimate
Send photos of the whole tub and close-ups of chips, cracks or rust, tell us the material if you know it, and mention whether it has been refinished before.
Tell us about your project and we’ll review your request. Photos of the bathtub, shower, tile or sink can help us evaluate the work.
Prefer to talk? Call us directly:
Call 770-945-0072