Skip to main content
Call 770-945-0072

Johns Creek residential refinishing

Bathtub Refinishing in Johns Creek, GA

In many Johns Creek bathrooms the tub is only part of the picture: the tile surround, shower walls and floor all show their age together. Refinishing these surfaces in one project gives the room a consistent finish without demolition or retiling.

Tile shower with stained grout and a dull floor before refinishingBefore
The same tile shower with refreshed tile and floor after refinishingAfter
Tile shower before and after. Photo is not location-specific.

Surfaces

Tub, tile and shower: what can be refinished

  • Bathtub

    Worn, stained or chipped tubs are cleaned, repaired and given a new bonded finish.

  • Tile surround

    Dated or dull wall tile is refinished to match the tub, once loose tile and failed grout are addressed.

  • Shower walls and pans

    Stall showers, shower pans and floors can be refinished when the surface is the problem, not a leak.

  • Sinks and vanities

    Ask about including stained or chipped sinks in the same visit.

Tile surrounds

Refinishing a tile surround with the tub

Retiling a tub surround means removing tile and backer board, then rebuilding the wall. When the existing tile is sound, refinishing changes its color and finish while the wall stays intact.

Refinishing is a surface treatment. It does not fix water getting behind the wall, so the tile and grout have to pass a few basic checks first.

Tile is usually ready when:

  • Tiles are firmly attached and do not sound hollow
  • Grout lines are intact, without large gaps
  • No soft drywall or staining on the wall behind
  • Caulk joints can be removed and renewed
Shower pan with dark staining before refinishingBefore
The same shower pan refinished in clean whiteAfter
Stained shower pan refinished. Photo is not location-specific.

Showers

Shower walls, pans and floors

Stall showers take daily wear on a small area, and stains often settle around the drain. When the pan and walls are sound, refinishing restores a clean, even surface.

A shower that leaks into the ceiling below, or has cracked or moving pans, needs a plumber or contractor first. We will tell you if we see signs of that.

Care

Keeping mineral stains away

Mineral deposits build up wherever water is left to sit. A refinished surface is smooth and easier to clean, and these habits help keep it that way.

  1. Step 1: Fix drips early

    A slow drip leaves a mineral trail on any surface. Repair leaking faucets and shower valves promptly.

  2. Step 2: Wipe and dry

    A quick wipe after use stops water spots from building into deposits.

  3. Step 3: Use gentle cleaners

    Choose non-abrasive products; harsh scrubbing pads and powders dull the finish.

How long a refinished tub can last

Unique Refinishers has more than 55 years of refinishing experience. Long-term results depend on preparation and daily care as much as the coating itself.

In our experience it is not uncommon to see tubs we refinished 10–15 years earlier still in excellent condition. That is an observation from our own work, not a guarantee: results depend on the condition of the tub, surface preparation, use and cleaning. Ask about written terms for your project before work begins.

Want the whole bathroom to match?

Send photos of the tub, tile and shower. We will tell you which surfaces can be refinished and give you a free estimate.

Johns Creek homeowner questions

Frequently asked questions

Can the tub and tile be refinished in one project?

Yes. Many homeowners refinish the tub and its tile surround together so the color matches. The tile has to be firmly attached with sound grout; loose tile or water damage behind the wall is fixed first.

Will refinished tile look like painted tile?

Professional tile refinishing uses a bonded coating system, not wall paint, and the grout lines remain visible. Our tile refinishing guide explains the process.

How do I prevent mineral stains on a refinished tub?

Fix drips, wipe the surface dry after use and clean with non-abrasive products. Mineral deposits form wherever water sits, so the less standing water, the better.

How is pricing affected by tile or shower walls?

Adding tile, shower walls or extra fixtures increases the area to prepare and coat, so the estimate reflects every surface included. See our cost guide for the main factors.

Johns Creek service area

Johns Creek areas we serve

We serve homes, townhomes and condominiums across Johns Creek. Share your address to confirm availability.

  • St Ives
  • Abbotts Bridge Road
  • The Forum and State Bridge Road
  • Medlock Bridge Road
  • Ocee
  • Newtown Park
  • Morton Road

Unique Refinishers works from its headquarters in Sugar Hill, Georgia, and does not have a separate office in Johns Creek. Availability varies by address, so call or request an estimate and we will confirm service for your home.

Prefer email or want our hours and address? Visit the contact page.

Request Your Free Johns Creek Refinishing Estimate

Send photos of the tub, tile and shower walls, mark any loose tile or stains, and tell us which surfaces you want included.

Tell us about your project and we’ll review your request. Photos of the bathtub, shower, tile or sink can help us evaluate the work.

Optional. JPG, PNG, WebP or HEIC, up to 10 MB.

Fields marked * are required. We use your details only to respond to this request.

Prefer to talk? Call us directly:

Call 770-945-0072